CT-3 Embossed Carrier Tape
CT-3 Embossed Carrier Tape
Forming machine
| Forming machine 56mm specification | |
|---|---|
| General Specification | |
| Tape width | MAX56mm(※MAX72mm) |
| Machine height | MAX12mm(Varies depending on formed shapes) |
| Die set placing space | 250mm(Feeding direction) x 270mm Die space 200m (Feeding direction) x 125mm |
| Electric power supply | 3 phase 200V, 465W(6.2kW), Single phase 100V, 0.2W |
| Air supply Air pressure |
Clean and dry air Min.5kgf/cm2, 500NL/min |
| Cooling water | Cooling water pipe and connection joint for Die protection cover (Pipe layout by customer) |
| Machine dimension | Approx.2250mm (L)x720mm(Depth)x1580mm(H) |
| Pressing section | |
| Capacity | 3 tons |
| Stroke | 30 mm |
| Number of stroke | 30 to 100 PM (Varies depending on forming material and shape) |
| Motor | AC 2.2kW x 4P (Inverter control) 200V, 50/60 Hz |
| Motor rotation | 630 to 2100rpm |
| Knock out mechanism | Air cylinder |
| Knock out stroke | 30mm |
| Punching debris discharge | Vacuum |
| Tape feeding section | |
| Operation | Air feeder |
| Feeding volume | 80mm |
| Feeding direction | Left to Right against Operation panel |
| Material feeding section | |
| Feeding | Motor Single phaze 100V, 50/60 Hz |
| Reel diameter | φ500mm |
| Heater section | |
| Heater | 遠赤外線ヒータ |
| Heater cpacity | 500W x 4 pcs. (※8pcs.) |
CT-3 Embossed Carrier Tape
Winding machine
| Winding machine 56mm specification | |
|---|---|
| General specification | |
| Electric power supply | Single phase 100V, 0.25kW (Connection from Forming machine) |
| Air supply Air pressure |
Clean and dry air Min. 5Kgf/cm2 |
| Machine dimension | Approx.1750mm (L)x650mm(Depth)x1800mm(H), excluding winding reel |
| Machine Device specification | |
| Tape width | 8mm,12mm,16mm,24mm,32mm,44mm,56mm (※60mm,72mm) available |
| Feeding pitch | 4mm |
| Reel | MAXφ600mm |
| Motor pinch roll |
Motor |
| Motor Winding |
Speed control motor |
| Stock for reel change | Approx. 4m |
| Problem checking | Defective pitch (4mm pitch) can be detected |
※mark shows 72mm use.