5 axis verical machining center with turning function
5 axis verical machining center with turning function
FTV-500iHV
Milling and Turing can be performed on one chucking.
- ①Milling spindle and turning tool post are in independent andexclusive structure.
- ②High speed up to 2,000min-1 on turning table,allowing turning work on a work piece of small redius.
- ③Only on ATC serves tool changing function for both milling and turning tools.
| FTV-500iHV | |
|---|---|
| axis travel | |
| X×Y×Z(mm) | 820×500×550 |
| B (deg) | -100～90 |
| C(deg) milling mode | 360 |
| Side of working surface | Ø400 |
| Rapid traverse | |
| X×Y×Z(m/min) | 48×48×48 |
| B (m-1) | 15 |
| C (m-1) milling mode | 50 |
| Spindle speeds | 15000 |
| table spindle speeds (turning mode) |
2000 |
| Spindle nose(Nominal size,No.) | BT40 |
| Turning tool post nose(Nominal size,No.) | BBT40 (Dual chucking/binding) |
| Electric motor | |
| Spindle Electric motor 30min/continuos |
15kW/11kW |
| table Electric motor 15min/continuos |
34kW/31kW |
| Automatic tool changer | |
| Tool storage capacity 32(ATC) | 32tools |
| Feed rate | |
| Rapid traverse | 48×48×48 |
| Floor space | 3480×3510 |
| Machine weight | 12500 |
| Controller | FANUC 31i - A5 |