5 axis verical machining center with turning function

5-axis vertical machining center with turning function actualize maximum machinig efficieney

Milling spindle and turning tool post are in independent andexclusive structure.
B-axis :Direct drive motor C-axis:2,000min^-1 built-in spindle motor.
High-precision machining under non-backlash.
High accessibillity by ergonomic design enables excellent workabillity.

X/Y/Z-axis travel	820mm/500/550mm
B-axis tilting angle	＋100℃～－100℃
C-axis tilting angle	360°
Distance between spindle center and table center (X-axis right and left,table horizontal)	450～－370mm
Distance between spindle center and table center (Y-axis front and back,Both table horizontal and vertical)	-250～250mm
Distance from table top to spindle end (Z-axis up and down,table horizontal)	0～550mm
Distance from table top to turning tool post end (Z-axis up and down,table horizontal)	31～581mm
Size of working surface	φ400mm
Permissible mass of workpiece(center)	150kg
Table working surface conifiguration	T-slots 14H8×5
Height from floor to table top	1,240mm
Spindle speeds	100～15,000min^-1 100～20,000min^-1(OP)
Spindle nose(Nominal size,No.)	BT40
Rapid traverse	X,Y,Z:48m/min
	B 50min^-1
	C(milling mode) 18,000deg/min(50min^-1)
Turning Feedrate	X,Y,Z:1～48m/min
	B 1～40min^-1
	C(milling mode) 1～18,000deg/min(0.03～15min^-1)
	C(turning mode)30～2,000min^-1
Motor
Spindle motor
High speed	10min/30min continuous 18.5kW/15kW/11kW
Low speed	continuous 7.5kW
C-axis motor(Built in spindle)	15min／continuous 34kW/31kW
Feed motors
X-axis	AC 4kW
Y-axis	AC 4kW
Z-axis	AC 7kW
B-axis	AC 8.1kW
ATC tool storage capacity	32tools
Height machine	3095mm
Floor space	3480mm×3510mm
Machine weight	12500kg
Controller	FANUC Series 31i